Jinzhong corn straw crushing equipment, Jinzhong wood crushing processing equipment) KaiTi, KaiTi How to control the output size of the wood chip crusher?
) Italics, Italics, ) The size of the output of the wood chip crusher is determined by the corresponding screen mesh configured according to the customer's purpose. We provide a wide range of screens.
) KaiTi, KaiTi, How to use a wood chip crusher safely?
) Kaiti, Kaiti, should be fixed on the ground, and can be fixed with cement. If the working location is frequently changed, the crusher and motor should be installed on a base made of angle steel.
After starting, the pulverizer should be idle for a few minutes and then start feeding after there are no abnormal phenomena.
Before work, staff should carefully check the materials to prevent metal, stones and other hard objects from entering the crushing chamber and causing accidents.
. Stop feeding before stopping the machine. After the materials in the standby are completely removed, cut off the power supply and stop the machine. Cleaning and maintenance should be carried out after shutdown.
Before starting, first turn the rotor by hand to check whether the operation is flexible and normal, whether there is any collision in the casing, whether the rotation direction of the rotor is correct, whether the motor and pulverizer are well lubricated, etc.
. The wood chip crusher must feed evenly. If there is any noise, the temperature of the bearing and body is too high, or materials are sprayed outward, the machine should be stopped immediately for inspection and troubleshooting.
After hours of operation, it must be cleaned. Bearings, when replacing the oil and installing the oil, it is better to fill the bearing seat gap /, and the maximum should not exceed /.
Jinzhong corn straw crushing equipment, Jinzhong wood crushing processing equipment