Zhengzhou Xiangzhi Machinery Equipment Co., Ltd.

Hebei agricultural tree branch crusher, Shijiazhuang forest tree branch crusher/() 体, italics, (How to control the size of the wood chip crusher?
/() 体, italics, () (Wood chip crusher output The size of the material is determined by configuring the corresponding screen mesh according to the customer's use. The screens we provide include,.
/() body, italic body, (How to use the wood chip crusher safely?
/() body, Kaiti, ( , should be fixed on the ground, and can be fixed with cement. If the working location is frequently changed, the crusher and motor should be installed on a base made of angle steel.
The crusher should be idle after starting Minutes, and then start feeding again after there are no abnormal phenomena.
, Workers should carefully check the materials before work to prevent metal, stones and other hard objects from entering the crushing chamber and causing accidents.
, Stop feeding before stopping the machine. After the materials in the standby machine are completely removed, cut off the power and shut down the machine. Cleaning and maintenance must be carried out after the machine is shut down.
Before starting, turn the rotor by hand to check whether the operation is flexible and normal, whether there is any collision in the casing, and whether the rotor is Whether the direction of rotation is correct, whether the motor and crusher are well lubricated, etc.
The wood chip crusher should feed evenly. If there is any noise, the temperature of the bearing and body is too high, or material is sprayed outward, the machine should be stopped immediately. Inspection and troubleshooting
After hours of operation, the bearings must be cleaned and the engine oil replaced. When installing the engine oil, it is better to fill the bearing seat gap with /, and the maximum should not exceed /.